FEATURES/BENEFITS:
- Penetrates deeply/ lubricates and protects inside chains,hinges,locks, assemblies.
- Displaces moisture/ useful on wet parts, drying ignitions and electrical circuits.
- Dries to a clean waxy film/ waterproof and not easily removed without solvent.
- Will not harm paints, plastics, rubber or vinyl/ safe on engines, wiring, belts, etc.
- BOESHIELD T-9 will attack existing corrosion, loosen rusty parts, and protect all metals for months.
BOESHIELD T-9 CONTAINS NO FLUOROCARBONS, MEK, OR ACETONE
TECHNICAL DATA ON BOESHIELD T-9:
- For a copy of a particular MSDS contact us.
- Corrosion Inhibition Meets BSS7220 and FED-STD-791, Method 4001 (Max. 3 dots 1mm per 10 square inches after 100 hours salt spray). Meets ASTM G-34 (Exfoliation Test).
- Water Displacement Meets MIL-C-16173D. Paragraph 46.11. No evidence of pitting, mottling, or staining.
- Penetrability Capillary height of rise 1.2″ minimum in bore ø=0.015″ at room temperature.
- Wet ability 30 dynes/cm.
- Flow Viscosity is 6 centistokes at 75±1°F.).
- Adhesion at Low Temperatures Flaking less than 1/32″ at -40±5K (MIL-O-16173D)
- Removability Aliphatic Naptha, Cleaning Solvent
- Solids 38%
- Flash Point Approximately 156°F. (TCC.)
- Coverage 500 to 1000 sq. ft. per gallon
